Mesenchymal stem cells-derived extracellular vesicles for therapeutics of renal tuberculosis.

Extrapulmonary tuberculosis with a renal involvement can be a manifestation of a disseminated infection that requires therapeutic intervention, particularly with a decrease in efficacy of conventional regimens. In the present study, we investigated the therapeutic potency of mesenchymal stem cell-derived extracellular vesicles (MSC-EVs) in the complex anti-tuberculosis treatment (ATT). A rabbit model of renal tuberculosis (rTB) was constructed by injecting of the standard strain Mycobacterium tuberculosis H37Rv into the cortical layer of the kidney parenchyma. Isolated rabbit MSC-EVs were intravenously administered once as an addition to standard ATT (isoniazid, pyrazinamide, and ethambutol). The therapeutic efficacy was assessed by analyzing changes of blood biochemical biomarkers and levels of anti- and pro-inflammatory cytokines as well as by renal computed tomography with subsequent histological and morphometric examination. The therapeutic effect of therapy with MSC-EVs was shown by ELISA method that confirmed a statistically significant increase of the anti-inflammatory and decrease of pro-inflammatory cytokines as compared to conventional treatment. In addition, there is a positive trend in increase of ALP level, animal weigh, and normalization of ADA activity that can indicate an improvement of kidney state. A significant reduction of the area of specific and interstitial inflammation indicated positive affect of MSC-EVs that suggests a shorter duration of ATT. The number of MSC-EVs proteins (as identified by mass-spectometry analysis) with anti-microbial, anti-inflammatory and immunoregulatory functions reduced the level of the inflammatory response and the severity of kidney damage (further proved by morphometric analysis). In conclusion, MSC-EVs can be a promising tool for the complex treatment of various infectious diseases, in particularly rTB.

Application of apophyllite and thomsonite natural zeolite as modified adsorbents for the removal of zinc from acid mine drainage.

Materials composed of natural zeolite have the potential to serve as highly effective adsorbents in the treatment of wastewater. The present study explores zeolite resin-based Apophyllite and Thomsonite as adsorbents for removing Zinc from acid mine drainage solution. The characteristics of the natural zeolites (Apophyllites and Thomsonite) are investigated using X-ray diffraction, Fourier-transform infrared spectroscopy and Field emission scanning electron microscopy analysis. The removal of Zinc from AMD is explored, and the influence of metal ion concentration, resin dose, and pH is investigated using a batch exchange resin-based experimental method. Maximum zinc removal occurs in the pH range of 2-6 with an initial zinc content of 50-250 mg/L and a resin dosage of 25-700 mg/L, indicating that the adsorption process is pH-dependent. Various isotherm models, including those proposed by Freundlich and Langmuir as well as Redlich-Peterson, Dubinin, and Temkin, are used to verify the results of the experimental research. All these isotherm models' constants are determined. Both resins showed different sorption efficiencies at different operating conditions. However, highest Zn removal efficiency of 86.2% was observed for the Thomsonite zeolite resin whereas Apophyllite zeolite resin showed maximum Zn uptake of 81.6%. Thus, Thomsonite was found to be an effective sorbent.

A review of microbial fuel cell and its diversification in the development of green energy technology.

The advancement of microbial fuel cell technology is rapidly growing, with extensive research and well-established methodologies for enhancing structural performance. This terminology attracts researchers to compare the MFC devices on a technological basis. The architectural and scientific successes of MFCs are only possible with the knowledge of engineering and technical fields. This involves the structure of MFCs, using substrates and architectural backbones regarding electrode advancement, separators and system parameter measures. Knowing about the MFCs facilitates the systematic knowledge of engineering and scientific principles. The current situation of rapid urbanization and industrial growth is demanding the augmented engineering goods and production which results in unsolicited burden on traditional wastewater treatment plants. Consequently, posing health hazards and disturbing aquatic veracity due to partial and untreated wastewater. Therefore, it's sensible to evaluate the performance of MFCs as an unconventional treatment method over conventional one to treat the wastewater. However, MFCs some benefits like power generation, stumpy carbon emission and wastewater treatment are the main reasons behind the implementation. Nonetheless, few challenges like low power generation, scaling up are still the major areas needs to be focused so as to make MFCs sustainable one. We have focused on few archetypes which majorities have been laboratory scale in operations. To ensure the efficiency MFCs are needed to integrate and compatible with conventional wastewater treatment schemes. This review intended to explore the diversification in architecture of MFCs, exploration of MFCs ingredients and to provide the foreseen platform for the researchers in one source, so as to establish the channel for scaling up the technology. Further, the present review show that the MFC with different polymer membranes and cathode and anode modification presents significant role for potential commercial applications after change the system form prototype to pilot scale.

ZIF-8 decorated cellulose acetate mixed matrix membrane: An efficient approach for textile effluent treatment.

The textile industry is the second largest water-intensive industry and generates enormous wastewater. The dyes and heavy metals present in the textile effluent, even at their lower concentrations, can cause an adverse effect on the environment and human health. Recently, mixed matrix membranes have gained massive attention due to membrane property enhancement caused by incorporating nanofillers/additives in the polymer matrix. This current study examines the efficacy of ZIF-8/CA membrane on dye removal and treatment of real-time textile industry effluent. Initially, ZIF-8 nanoparticles were synthesized using a probe sonicator. The XRD, FT-IR, and SEM analysis confirmed the formation of crystalline and hexagonal facet ZIF-8 nanoparticles. The ZIF-8 nanoparticles were dispersed into a cellulose acetate matrix, and a membrane was prepared using the "phase inversion method." The membrane was characterized using FT-IR and SEM analysis, which endorse incorporating ZIF-8 into the polymer matrix. Later, the efficacy of the ZIF-8/CA membrane was verified by dye removal studies. The dye removal studies on crystal violet, acid red 13, and reactive black 5 reveal that the membrane is ∼85% efficient in dye removal, and the studies were further extended to real-time textile effluent treatment. The studies on textile effluent prevail that ZIF-8/CA membrane is also proficient in removing chemical oxygen demand (COD) ∼70%, total organic carbon (TOC) ∼80%, and heavy metals such as lead, chromium, and cadmium from textile wastewater and proved to be efficient in treating the textile effluent.

Unveiling Various Facades of Tinospora cordifolia Stem in Food: Medicinal and Nutraceutical Aspects.

Natural products with curative properties are gaining immense popularity in scientific and food research, possessing no side effects in contrast to other drugs. Guduchi, or Tinospora cordifolia, belongs to the menispermaceae family of universal drugs used to treat various diseases in traditional Indian literature. It has received attention in recent decades because of its utilization in folklore medicine for treating several disorders. Lately, the findings of active phytoconstituents present in herbal plants and their pharmacological function in disease treatment and control have stimulated interest in plants around the world. Guduchi is ethnobotanically used for jaundice, diabetes, urinary problems, stomachaches, prolonged diarrhea, skin ailments, and dysentery. The treatment with Guduchi extracts was accredited to phytochemical constituents, which include glycosides, alkaloids, steroids, and diterpenoid lactones. This review places emphasis on providing in-depth information on the budding applications of herbal medicine in the advancement of functional foods and nutraceuticals to natural product researchers.

Hybrid hydrodynamic cavitation (HC) technique for the treatment and disinfection of lake water.

Water reclamation from lakes needs to be accomplished efficiently and affordably to ensure the availability of clean, disinfected water for society. Previous treatment techniques, such as coagulation, adsorption, photolysis, ultraviolet light, and ozonation, are not economically feasible on a large scale. This study investigated the effectiveness of standalone HC and hybrid HC + H2O2 treatment techniques for treating lake water. The effect of pH (3 to 9), inlet pressure (4 to 6 bar), and H2O2 loading (1 to 5 g/L) were examined. At pH = 3, inlet pressure of 5 bar and H2O2 loadings of 3 g/L, maximum COD and BOD removal were achieved·H2O2 was observed to significantly improve the performance of the HC when used as a chemical oxidant. In an optimal operating condition, a COD removal of 54.5 % and a BOD removal of 51.5 % using HC alone for 1 h is observed. HC combined with H2O2 removed 64 % of both COD and BOD. The hybrid HC + H2O2 treatment technique resulted in a nearly 100% removal of pathogens. The results of this study indicate that the HC-based technique is an effective method for removing contaminants and disinfection of the lake water.

Recent advances in aqueous virus removal technologies.

The COVID-19 outbreak has triggered a massive research, but still urgent detection and treatment of this virus seems a public concern. The spread of viruses in aqueous environments underlined efficient virus treatment processes as a hot challenge. This review critically and comprehensively enables identifying and classifying advanced biochemical, membrane-based and disinfection processes for effective treatment of virus-contaminated water and wastewater. Understanding the functions of individual and combined/multi-stage processes in terms of manufacturing and economical parameters makes this contribution a different story from available review papers. Moreover, this review discusses challenges of combining biochemical, membrane and disinfection processes for synergistic treatment of viruses in order to reduce the dissemination of waterborne diseases. Certainly, the combination technologies are proactive in minimizing and restraining the outbreaks of the virus. It emphasizes the importance of health authorities to confront the outbreaks of unknown viruses in the future.

The physical, mechanical, thermal and barrier properties of starch nanoparticle (SNP)/polyurethane (PU) nanocomposite films synthesised by an ultrasound-assisted process.

This article reports on the ultrasound-assisted acid hydrolysis for the synthesis and evaluation of starch nanoparticles (SNP) as nanofillers to improve the physical, mechanical, thermal, and barrier properties of polyurethane (PU) films. During the ultrasonic irradiation, dropwise addition of 0.25 mol L-1 H2SO4 was carried out to the starch dispersion for the preparation of SNPs. The synthesized SNPs were blended uniformly within the PU matrix using ultrasonic irradiation (20 kHz, 220 W pulse mode). The temperature was kept constant during the synthesis (4 °C). The nanocomposite coating films were made with a regulated thickness using the casting method. The effect of SNP content (wt%) in nanocomposite coating films on various properties such as morphology, water vapour permeability (WVP), glass transition temperature (Tg), microbial barrier, and mechanical properties was studied. The addition of SNP to the PU matrix increased the roughness of the surface, and Tg by 7 °C, lowering WVP by 60% compared to the PU film without the addition of SNP. As the SNP concentration was increased, the opacity of the film increased. The reinforcement of the SNP in the PU matrix enhanced the microbial barrier of the film by 99.9%, with the optimal content of SNP being 5%. Improvement in the toughness and barrier properties was observed with an increase in the SNP content of the film.

WITHDRAWN: Recent Advances and Reports on Encapsulation in the Food Matrix: A Review

Since the authors are not responding to the editor's requests to fulfill the editorial requirement, therefore, the article has been withdrawn.Bentham Science apologizes to the readers of the journal for any inconvenience this may have caused.The Bentham Editorial Policy on Article Withdrawal can be found at https://benthamscience.com/editorial-policies-main.php. BENTHAM SCIENCE DISCLAIMER: It is a condition of publication that manuscripts submitted to this journal have not been published and will not be simultaneously submitted or published elsewhere. Furthermore, any data, illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained. Plagiarism is strictly forbidden, and by submitting the article for publication the authors agree that the publishers have the legal right to take appropriate action against the authors, if plagiarism or fabricated information is discovered. By submitting a manuscript the authors agree that the copyright of their article is transferred to the publishers if and when the article is accepted for publication.

Ultrasound-assisted synthesis of nanoemulsion/protein blend for packaging application.

In the present work, we studied the formation of sunflower oil nanoemulsion using ultrasound techniques. Later, we investigated the development of active films based on a mixture of whey protein containing sunflower oil base nanoemulsion with different concentrations (10, 25, and 50% of total whey protein). The prepared film was by analyzing using the Fourier transform infrared (FTIR), X-ray diffraction (XRD), and field-emission scanning electron microscope (FE-SEM). The film shows no changes in its integrity and crystallinity compared to the virgin film. The presence of nanoemulsion improves the mechanical properties from 2.75 MPa to 3.52 MPa while it decreases the water vapor permeability from 3.4 × 10-10 to 1.3 × 10-10g/m.s.Pa for concentrations NE (50% of Whey protein). The antioxidant activity for Tween 20 nanoemulsion is 38.7% compared to 36.1% for Tween 80 nanoemulsion. The antimicrobial activity of the film contains sunflower nanoemulsion higher than virgin films. The results showed the potential of blend film of whey protein with nanoemulsion for active films for novel food protection.

A review on recent advances in hydrogen energy, fuel cell, biofuel and fuel refining via ultrasound process intensification.

Hydrogen energy is one of the most suitable green substitutes for harmful fossil fuels and has been investigated widely. This review extensively compiles and compares various methodologies used in the production, storage and usage of hydrogen. Sonochemistry is an emerging synthesis process and intensification technique adapted for the synthesis of novel materials. It manifests acoustic cavitation phenomena caused by ultrasound where higher rates of reactions occur locally. The review discusses the effectiveness of sonochemical routes in developing fuel cell catalysts, fuel refining, biofuel production, chemical processes for hydrogen production and the physical, chemical and electrochemical hydrogen storage techniques. The operational parameters and environmental conditions used during ultrasonication also influence the production rates, which have been elucidated in detail. Hence, this review's major focus addresses sonochemical methods that can contribute to the technical challenges involved in hydrogen usage for energy.

Recent Advances in Ultrasound-Assisted Synthesis of Nano-Emulsions and their Industrial Applications.

BACKGROUND: Colloidal systems are used in various industrial and medical applications. Nanoparticles have good physio-chemical properties that enhance the performance of the system. Nano-emulsions can be synthesized by ultrasonication. Ultrasonication is the simplest method as compared to other available methods. The purpose of this article is to review the recent advances in ultrasound- assisted nano-emulsion synthesis and challenges regarding the safety of the nano-emulsion. METHODS: Application of the nano-emulsions in the various industrial and medical processes like drug delivery process, food industry, pesticide industry and cosmetics industry is also reviewed. RESULTS: Ultrasound-assisted synthesis of nano-emulsions is a simple method as compared to other synthesis methods of the nano-emulsions. Nano-emulsions have potential applications in the cosmetic, drug delivery, pesticides and industry. CONCLUSION: Fabrication of the nano-emulsions is different for each application and product. Physiochemical properties should be strictly monitored in the nano-emulsions as they influence the efficiency of the nano-emulsions greatly. Ostwald ripening is the main phenomenon for the nano-emulsions mechanism.

Synthesis of cellulose nanocrystals (CNCs) from cotton using ultrasound-assisted acid hydrolysis.

This present work reports the synthesis of Cellulose nanocrystals (CNCs) from cotton using an ultrasound-assisted acid hydrolysis. Further, the synthesized CNCs was comprehensively characterized using Fourier Transform Infrared Spectroscopy (FTIR) to analyze surface functional groups and X-ray diffraction (XRD) in studying structural characteristics. Differential Thermal Analysis (DTA) and Thermogravimetric Analysis (TGA) have been used to study the thermal properties of CNCs. Morphology of CNCs was studied using a Transmission Electron Microscope (TEM) and Scanning Electron Microscope (SEM). The crystallite size was found to be 10-50 nm using XRD data and the average particle size to be 221 nm using PSD analysis.

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition.

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (Icorr) decreases from 16.7 A/m2 for bare material to 0.103 A/m2 for 4% coating of HNPs. Applied potential (Ecorr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.

Effect of process parameters on the recovery of lactose in an antisolvent acetone/acetone-ethanol mixture: A comparative study based on sonication medium.

Recovery of lactose from the whey using sonocrystallization was studied experimentally. The effect of sonication medium and irradiation power levels was evaluated using three different ultrasonic equipments. Effects of various parameters such as sonication time, pH of the medium, antisolvent (acetone and acetone-ethanol mixture) and concentration of lactose were determined. The optimal parametric conditions were analyzed using differential scanning calorimetry, thermogravimetric analysis, particle size distribution, and zeta potential measurements. Overall, the highest lactose recovery was obtained using a mixture of acetone and ethanol as antisolvent in bath sonication as well as atomization process.

Intensification of delignification of Tectona grandis saw dust as sustainable biomass using acoustic cavitational devices.

Delignification of sawdust was studied using ultrasound assisted alkali peroxide approach using longitudinal horn for the first time and the efficacy compared with more commonly used configurations of ultrasonic reactors. Comparison with the conventional approach based on stirring has also been presented to establish the process intensification benefits. Effect of different operating parameters such as sodium carbonate concentration (0.1, 0.15, 0.2, 0.25 M), hydrogen peroxide concentration (0.2, 0.4, 0.6, 0.8, 1 M) and biomass loading (2, 4, 6, 8, 10 wt%), on the efficacy of lignin extraction has been investigated for different ultrasonic reactors. The optimum conditions for probe type ultrasonic horn were established as 150 W, 50% duty cycle and 80% amplitude with optimum process conditions as Na2CO3 concentration as 0.2 M, H2O2 concentration as 1 M, biomass loading of 10 wt% and operating time of 70 min. Longitudinal horn resulted in best efficacy (both in terms of yield and energy requirements) followed by ultrasonic horn and ultrasonic bath whereas the conventional approach was least effective. The obtained lignin was also analyzed using different characterization techniques. The presence of peaks at wavelength range of 875-817, 1123-1110, and at 1599 cm-1 for the extracted sample confirmed the presence of lignin. Increase in the crystallinity index of the processed sample (maximum for longitudinal horn) also confirmed the lignin removal as lignin is amorphous in nature. Overall it has been concluded that ultrasound can be effectively used for delignification with longitudinal horn as best configuration.

Tannery wastewater treatment by cavitation combined with advanced oxidation process (AOP).

Studies on the degradation of organic pollutants (phenolic, tannins etc.,) present in the wastewater released from tannery industry have been carried out in this work. The combined effect of cavitation and magnetic stirring with the advanced oxidation processes (AOPs) has been compared. The different parameters that affect the chemical oxidation process of the tannery wastewater, like pH, ultrasound irradiation time and dosage of hydrogen peroxide (H2O2) were studied. The samples were treated by two different approaches by varying these parameters. In the first approach, wastewater was treated in the presence of cavitation using ultrasound probe sonicator and in the second approach in the presence of magnetic stirring using magnetic stirrer was used. In both the cases, the suspended total organic carbon (TOC) was measured before and after varying the parameters to ensure the destruction of organic pollutants present in the wastewater sample. The optimum conditions obtained with ultrasonic cavitation was further used in hydrodynamic cavitation set-up in order to increase the efficiency. The experimental results show that the combination of cavitation and H2O2gives a higher reduction in suspended TOC values of tannery wastewater than with addition of only hydrogen peroxide (H2O2).

Intensification of degradation of methomyl (carbamate group pesticide) by using the combination of ultrasonic cavitation and process intensifying additives.

In the present work, the degradation of methomyl has been carried out by using the ultrasound cavitation (US) and its combination with H2O2, Fenton and photo-Fenton process. The study of effect of operating pH and ultrasound power density has indicated that maximum extent of degradation of 28.57% could be obtained at the optimal pH of 2.5 and power density of 0.155 W/mL. Application of US in combination with H2O2, Fenton and photo-Fenton process has further accelerated the rate of degradation of methomyl with complete degradation of methomyl in 27 min, 18 min and 9 min respectively. Mineralization study has proved that a combination of US and photo-Fenton process is the most effective process with maximum extent of mineralization of 78.8%. Comparison of energy efficiency and cost effectiveness of various processes has indicated that the electrical cost of 79892.34Rs./m(3) for ultrasonic degradation of methomyl has drastically reduced to 2277.00Rs./m(3), 1518.00Rs./m(3) and 807.58Rs./m(3) by using US in combination with H2O2, Fenton and photo-Fenton process respectively. The cost analysis has also indicated that the combination of US and photo-Fenton process is the most energy efficient and cost effective process.

Removal of Brilliant Green from wastewater using conventional and ultrasonically prepared poly(acrylic acid) hydrogel loaded with kaolin clay: A comparative study.

The present work deals with the removal of Brilliant Green dye from wastewater using a poly(acrylic acid) hydrogel composite (PAA-K hydrogel) prepared by incorporation of kaoline clay. The composite has been synthesized using ultrasound assisted polymerization process as well as the conventional process, with an objective of showing the better effectiveness of ultrasound assisted synthesis. It has been observed that the hydrogel prepared by ultrasound assisted polymerization process showed better results. The optimum conditions for the removal of dye are pH of 7, temperature of 35°C, initial dye concentration of 30mg/L and hydrogel loading of 1g. The extent of removal of dye increased with an increase in the contact time and initial dye concentration. A pseudo-second-order kinetic model has been developed to explain the adsorption kinetics of dye on the PAA-K hydrogel. Thermodynamic and kinetic parameters indicate that the adsorption process is spontaneous in nature and the PAA-K hydrogel prepared by ultrasound process is a promising adsorbent compared to conventional process. The obtained adsorption data has also been fitted into commonly used adsorption isotherms and it has been found that Freundlich as well as Langmuir adsorption isotherm models fits well to the experimental results.